| |
|
|
Slide 3 of 7
|
< Previous | Next >
|
|
CYLINDER HEAD MACHINING AND PREPARATION
|
|
|
After initial inspection, all guides are bored to accept oversize valve stems. Valve seats are given three angle machining. All heads are not only mangnuflux inspected, but also 100% pressure tested to insure the highest quality control.
|
|
Cylinder heads are then resurfaced to the gasket manufacturer's required surface specifications. Once the cylinder head passes final inspection, it is then assembled with all new components and vacuum tested to insure proper valve seating.
|
|
|
|
|
